About Us Why CTB Commercial Projects Photo Gallery Tender Requirements Enquiries
CTB Corporate
CTB Domestic
CTB Commercial
CTB Industrial
 
tender requirements

Below is a checklist for a tender.
To keep a copy of your checklist simply press the submit button and then print.

 
Caravan Parks
Cabins Required:    
Number of units needed  
Configurations:    
Number of One Bedroom  
Number of Two Bedroom  
Number Three Bedroom  
Number of Four Bedroom  
Standards, regulations & codes that cabins need to comply
Maximum size of cabin metres long metres wide
  (including metre wide verandah/decking at
front side back ).
Site Preparation:    
Council to connect the utilities.  
Preparation of site including levels & footings.  
General:    
All raked ceilings to have a minimum of metre rise.
All internal woodwork (beams, reveals, skirting, architrave’s & doors) limed & clear coated
       with coats sanded between coats.
Weathertex milwood cladding painted to colour requirements.
Full choice of window colour in powder coated or anodised.
Trendsetter decorators range of power points & light switches to suit décor.
Anodised or powder coated sliding security screen.
mm side eaves with timber facia & 300mm rear eaves.
Security mesh on all windows.  
Exterior light on verandah.  
External sensor lighting at rear of cabin & on carpark side.
All verandah, deck & handrails finished in kiln dried treated pine with full width timber
       steps provided.
All timber dado to be limed & clear coated.  
Hot dipped gal chassis welded & Hot Stick Galvanizing at all welds.
F7 treated pine joints at mm centres.
Aquabar 19mm flooring.    
All frames pre-manufactured according to Australian standards.
Cabins engineered to m/s wind loading.
Fully engineered roof trusses where required.  
R2.5 insulation blanket to roof.  
R 2.5 wall insulation to all external walls.  
All roof & gutters to be colourbond.  
All internal walls to be mm gyprock with mm cornice &
       villaboard to bedroom & bathroom
All walls sealed & coats of paint.
Internal sliding doors are to have double roller track & hinged pelmets.
Wet area floor fully fibreglassed & waterproofed & a 50mm floor waste fitted.
All cabinets to be constructed of mm HMR board.
All curtains to be hung on hand glide anodised colour coordinated tracts &
       all sheer curtains & drapes to be times fullness.
All drapes to suit décor & be backed to block light & temperatures.
Quality curtains with privacy sheers on double tracks.
Bathroom:
Certified waterproofing.
Painted villaboard walls.
Acrylic shower base with shower screen.
Shower hob to be minimum mm.
All bathroom fittings chrome.
Bathroom buddy combination heat lights & exhaust fan.
Vanity unit in polymarble finish with three drawers.
Mirror with powdercoated frame.
Light above mirror.
Bathroom to have ceramic hammer edge tiles on walls to metres high,
       with picture border tile.
Selection of tiles
Ceramic tiles to floor.
Skylight to bathroom to be polycarbonate vented type.
Double powerpoint.
Tapware in shower to be offset near shower for easy access.
Gas HWS.
Acrylic WC & cistern – dual flush.
Tempering valves fitted.
Bedroom 1:
Full height wardrobe with sliding doors complete with shelf unit & hanging space
       – if possible internal walls of wardrobe to be villaboard.
Queen size bed ensemble & bedspread.
Bedhead fully finished timber bedhead with timber beside tables with doors.
Recessed reading lights above bed.
Flush fitting ceiling lights with two-way switch mounted at door & above bed.
Dimmers.
Heavy-duty vinyl floor coverings to selected colours & patterns.
cm remote control television – motel style.
TV wall bracket beside wardrobe.
TV coaxial cable point & cable to roof.
Clock radio.
Two double power points.
Ceiling fan/light.
Full length wall mounted mirror.
mm x mm window.
Painted gyprock walls (above metres high) & ceiling.
Dado on walls to height of metres.
Bedroom 2:
One wardrobe with shelves & hanging space – if possible internal walls of wardrobe
       to be villaboard.
Flush mounted reading lights to all beds separately switched.
Double power point.
Heavy duty vinyl floor coverings to selected colours & patterns.
Villaboard painted walls.
Gyprock painted ceilings.
mm x mm window.
Bunk combination to sleep three people (bottom to be double).
Living Area:
Ceramic tiles on floor to be selected colours & patterns.
Painted gyprock walls above metres.
Dado on walls to height of metres.
Ceiling fan.
Decorative light.
seater sofa bed & lounge.
Table & chairs.
cm motel style TV & TV stand.
TV coaxial cable point at floor level & cable to roof.
Two double power points.
Painted gyprock walls, protective board behind lounge.
mm x mm sliding glass door with security screen.
Two windows no smaller than mm x mm each.
Air conditioning.
Kitchen:
Rolled edge bench tops.
All kitchen colours to blend with overall colour scheme.
Four burner upright gas cooker with grill oven with electric ignition.
Ducted rangehood.
Litre microwave (optional).
Microwave cupboard (to be waist height).
Cutlery tray & tea towel rail.
Provision for waste bin.
mm stainless steel sink & flickmaster tap chrome.
Fully tiled splashback 600mm high with picture border tiles.
litre fridge. (optional)
Overhead cupboards.
Highly moisture resistant board used in all cupboards.
Two power points to bench top.
Painted gyprock walls.
Ceramic tiles on floor to selected colours & patterns.
General:
All workmanship & finish to be of high standard.
All internal fittings & fixtures to be colour coordinated with emphasis on holiday feel &
       healthy luxury look.
Delivery & site installation includes levelling & cladding from floor level to ground level
       with horizontally mounted treated decking pine & anchoring.
Site should be clear space. Access has been assessed & no problem exists on site.
Smoke detectors to Australian Standards hardwired.
Plumbing, electrical or gas connections will be installed by Great Lakes Council.
Check with Engineering Division if besser block footing – anchoring. Using star
       picket/turnbuckle set in 200mm x 600mm. Concrete would be acceptable.
Cabin manufacturer to provide all connection points below floor level.
Upon completion of works the supplier for each of the cabins must give a Structural
       Engineers Certificate to Council.
Warranty:
0-7 years structural warranty.
12 months guarantee on material & workmanship excluding wear & tear.
All prime cost items covered by manufacturer warranty.
On completion of installation each cabin is to be inspected by a Council officer together
       with the manufacturer, if requested & a certificate of completion issued.
    © Custom Transportable Buildings Pty Ltd.